鋁板生產廠家鋁板應采用鑄軋(俗稱冷軋)和熱軋(不論熱軋和壓鑄，更終一定是冷軋成形)1,軋制板(即你說的冷軋鋼板)是使用鋁錠和其他原材料融化,鋁水直接流入兩大滾輪,滾動的所需的鋁坯(通常約8毫米的鋁卷板),冷滾壓成形后你想鋁板的厚度,所以容易出現水波紋。
　　Aluminum plate manufacturers should adopt casting rolling (commonly known as cold rolling) and hot rolling (regardless of hot rolling and die casting, the final product must be cold rolling) 1. Rolling plate (i.e. cold rolling steel plate) uses aluminum ingot and other raw materials to melt. Aluminum water flows directly into the two rollers to roll the required aluminum billet (usually about 8 mm aluminum coil). After cold rolling, you want the thickness of aluminum plate, So water ripples are easy to appear.

　　而原材料如熱軋板則是鋁冶煉，鋁水流入方型模具制造鋁坯(即鑄坯)。深井錠),通常由鋁坯厚度,拉纖逆流或毫米厚(厚度),鋁坯后通過五六百度在烘箱加熱小時(也稱為均勻化處理),飛機表面后,經過熱軋和冷軋過程、復雜很多,因此產生更穩定的多輥鑄造鋁,好多了。(在成本方面，更加均勻化處理，在加熱油燃燒的同時，還會有大型機器熱軋用電等，成本要高得多)問陽極氧化前，鋁板沒有出現水紋，為什么陽極氧化后鋁板會出現水紋?
　　The raw materials such as hot-rolled plate are aluminum smelting, and aluminum water flows into the square mold to make aluminum billet (i.e. casting billet). Deep well ingot) is usually made of aluminum billet thickness, fiber drawing countercurrent or millimeter thickness (thickness). After the aluminum billet is heated in the oven for hours (also known as homogenization treatment) through 56 Baidu. After the surface of the aircraft, after the hot rolling and cold rolling process, it is much more complicated, so a more stable multi roll casting aluminum is produced, much better. (in terms of cost, more uniform treatment, while heating oil is burning, there will be large-scale hot rolling machines, etc., with much higher cost.) ask why there is no water mark on the aluminum plate before anodizing, and why does the water mark appear on the aluminum plate after anodizing?
　　之前為什么陽極沒有水波紋,陽極,之后才與鋁板的生產過程,因?yàn)闊彳堜摪寤蜩T軋板是否通過冷軋,更后水波紋是軋制板兩個數據的研磨輪,之前未加工的肉類是看不見的,但是你可以在陽極堿洗和酸洗,現在應該還能看到一點點。然后如果用自然色氧化變得明顯，硬氧化就更明顯。
　　Why there is no water ripple on the anode before the production process of aluminum plate? Because whether the hot-rolled steel plate or cast rolling plate passes the cold rolling? At last, the water ripple is the grinding wheel of two data of rolling plate. The previously unprocessed meat can't be seen, but you can see it in the anode alkali washing and pickling. Now you should see a little. Then if the natural color oxidation becomes obvious, the hard oxidation is more obvious.
　　以上是鋁板生產廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.yelang007.comThe above is the relevant content introduced by the aluminum plate manufacturer for you. To learn more, please visit the website: http://www.jndclyxgs.com